EXD200 2-Head Home Studio Lighting Kit INT119
***Toda la informacion de este anuncio son las especificaciones del fabricante y por el momento solo se encuentra disponible en ingles.Cualquier duda al respecto puede consultarlo directamente con nosotros y con gusto atenderemos sus preguntas a la brevedad posible.
The EXD200 is lightweight and stylish yet very robust, and it is designed specifically for 21st century photographers on the move. The 5 volts Sync voltage makes them highly suitable for use with all current digital and film cameras. Touch button controls allow the desired power levels and functions to be quickly set. The EXD can also overcome the problem caused by cameras that send out a pre flash before exposure, a simple press of the touch button controls tells the EXD to ignore any pre flash. Accurate power adjustment in one tenth of an f-stop increments over a 4 f-stop range and a high guide number of 45 (135ft) ensure the exact amount of light required. A built in Infra red slave cell allows freedom in the studio when used with the Interfit IRX transmitter. (INT411)
| Model | EXD200 |
| Kit Contents | 2 x EXD200 heads, 2 x Air-damped stands (COR750) | 1 x Softbox 60x60 cm(24x24") 1 x Translucent Umbrella | All Sync & Power leads, instructions, All in one kit bag |
| Guide Number | 45-mtrs
135-ft | Digital back meter readings |
| Fuse rating | 6.3 amps |
| Recycle Time (100%) | 230 volts, 1.5 seconds 110 volts, 2 seconds |
| Auto Power Dump | Yes when flash output is lowered by 1/10th of f stop or more |
| Recycle confirm | Ready lamp & audio beep (switchable bleep) |
| Flash duration | 1 ~ 3 m/secs |
| Output range | Full Power down to 1/8th power. (4 f-stops) |
| Modelling Lamp | 60 Watt Halogen | |
| Colour Temperature | 5600k +/-200 K |
| Flash Triggering | Sync cable, IR-trigger, flash or test button. |
| User changeable flashtube | Yes |
| Trigger Voltage | 5 volts |
| Pre-flash Program | For cameras with a pre-flash monitor program, can be set to sync with 1st,2nd or 3rd flash "Top light on is the standard Sync setting" |
| Slave cell distance | 10 meters (30 ft) |
| Working Voltage | EUR 230V/50Hz USA 110V/60Hz |
Total size including
reflector & stand mount
| 275 L x 215 W x 265 H with reflector |
| Weight - Kg (lbs) | 0.68kg (1.8 lbs) |
