This is the radio controlled, electric powered, Ready to Fly Hobbico NexSTAR Mini EP Park Flyer Trainer Airplane. RTF version includes 4-ch 2.4GHz, Motor, ESC and Servos installed. Park Pilot Program Legal Aircraft*Retains many of the innovations of the glow powered NexSTAR select including** *SpinControl airfoil extensions, SpeedBrakes training flaps* *and the patented PivotFlex wing mounting system.* FEATURES: Construction: Built-up wood Wings: Two piece, precision airfoil with SpinControl Airfoil Extensions provide lift even in a stall to keep the NexSTAR Mini EP level and the pilot in control. PivotFlex Wing Mounting System fastens with one nylon bolt, a rubber retainer and pivoting channel absorb minor jolts of normal use, more severe jolts cause the wing to separate from the fuselage and escape the full force of impact. Airspeed Restrictor: SpeedBrakes Training Flaps attach to forward section of wing near fuselage and hold airspeed to a minimum to insure smooth landings, removeable as pilot skills increase. Covering: Top Flite MonoKote Landing Gear: Main, composite plastic construction, nose, 0.08" (2mm) diameter steel wire Wheels: Three foam 1.5" (38mm) diameter Battery: SuperTigre 1250mAh 15C 11.1V LiPo Battery Charger: 3S LiPo balancing DC powered charger with car adapter Radio: Tactic TTX440 2.4GHz 4-channel Servos: Four ElectriFly Nano size, 2-aileron, 1-elevator, 1-rudder Motor: SuperTigre 400 size brushless Electronic Speed Control: SuperTigre 20A Propeller: Plastic, 9x6E Building Time: Ready to fly in 30 minutes with only a screwdriver-no gluing required Warranty Period: Hobbico guarantees this kit free from defects in both material and workmanship at the date of purchase. This warranty does not cover any component part damaged by use or modification. INCLUDES: Hobbico RTF NexSTAR Mini EP, motor, ESC, 2.4GHz radio, servos, prop 4 AA batteries, spinner, landing gear and instruction manual REQUIRES: Small phillips screwdriver SPECS: Wingspan: 44" (1120mm) Wing Area: 296 sq in (19.1 sq dm) Wing Loading: 12.2 - 13.6 oz/sq ft (37 - 42 g/sq dm) Length: 36.5" (925mm) Weight: 25 - 28 oz (710 - 790 g) Airfoil: Flat bottom, high wing mount Center of Gravity (CG): No numerical value given-follow directions on page 10 of manual to set CG Control Throws-Factory set, changes not recommended Elevator-Up, Down: 3/8" (10mm) 16° Rudder-Right, Left: 5/16" (8mm) 13° Ailerons-Up, Down: 7/16" (11mm) 15° | 
