Niagara Cutter N85594 Carbide Square Nose End Mill, Inch,

Descripción

NIAGARA CUTTER N85594 CARBIDE SQUARE NOSE END MILL, INCH, TIALN FINISH, ROUGHING AND FINISHING CUT, 30 DEGREE HELIX, 4 FLUTES, 2.5" OVERALL LENGTH, 0.250" CUTTING DIAMETER, 0.250" SHANK DIAMETER

Size: 1/4 in

Diámetro de corte:0.250 Inches | Longitud de corte:0.75 Inches | Largo de cordel del artículo:2.5 Inches The Niagara Cutter C430 TiAlN-coated carbide square nose end mill has four flutes and a 30-degree helix angle for general-purpose machining on a range of materials. The tool’s square end creates sharp, unrounded cuts, and the center-cutting design has cutting teeth at the end of the tool, so it can be fed into the workpiece like a drill bit. Four flutes produce a better finish than fewer flutes. The 30-degree helix angle supports general-purpose applications. It balances lower angles’ strong cutting edge for difficult-to-machine materials with higher angles’ increased cutting action. The TiAlN coating resists heat better than TiN and TiCN coatings, increasing tool life and performance. It also offers increased hardness for abrasion resistance and may reduce the need for lubricants based on the application. (TiAlN is suitable for a range of materials, but TiCN or uncoated end mills are recommended for machining aluminum.) The carbide substrate is harder than high-speed or cobalt steel, making it more wear resistant at high speeds and providing longer tool life. Cutting diameter tolerance is +0.000” to -0.002”. The round shank accommodates a variety of holders. End mills are designed to remove material and create multi-dimensional shapes and profiles. They have cutting edges along the outside diameter and flutes that remove chips from the cutting area and allow cooling fluids to enter. If heat is not reduced effectively, the tool’s cutting edges will dull and additional material buildup can occur. The number of flutes can range from two to eight. Two-flute designs offer the most efficient chip removal, but more flutes provide a smoother finish. The shank is the end of the tool held in place by a tool holder or machine. Center-cutting end mills can create three-dimensional shapes and profiles, and make plunge cuts similar to a drill bit. Non-center-cutting end mills are for applications such as peripheral milling and finishing, but cannot make plunge cuts. Niagara Cutter has been designing and manufacturing precision cutting tools since 1954. Specializing in end mills, cutting mills, and saws, the company is based in New York and manufactures its tools at facilities in Pennsylvania and Massachusetts. This allows the company control over production, from substrate to coating, which is essential for customers in a variety of industries, especially aerospace and automotive.

*Cuatro copas produce un acabado mejor que menos copas,

*Cuadrado nariz End Mills (también llamado cuadrado final) crear Sharp, unrounded cortes,

*Revestimiento de nitruro de aluminio de titanio (TiAlN) lubrica el molino de extremo para la estabilidad y la resistencia a la abrasión a altas velocidades de corte de alta temperatura, que ofrece una mejor resistencia al calor que lata y TiCN revestimientos,

*Puede funcionar a velocidad mayor que la broca de metal duro, resistente al desgaste y temper