Almohadilla Térmica De Refrigeración De Tarjeta Gráfica De 1

Descripción

Specifications:
Color: Gray
Thermal conductivity: 16.8W/mk
Density: 3.60.2g/cc
Hardness: 30-50sc
Breakdown voltage: 10KV/1mm
Product size: about 85x45mm/3.35x1.77 inch, about 120*120mm/4.72*4.72 inch (optional)
 (optional)
Optional thickness: about 0.5mm/0.02inch, about 1.0mm/0.04inch, about 1.5mm/0.06 inch, about 2.0mm/0.08inch,about 2.5mm/0.1 inch, about 3.0mm/0.12 inch(optional)

Instructions for use:
Install the thermal pad:
The installation of thermal pads is much simpler than thermal paste, because they can easily fit in various places where heat dissipation is required, so even a novice has no difficulty.
Remove the old thermal pad:
every time the radiator is removed or installed. Aged thermal pads need to be removed. Clean up thoroughly. And use a new thermal pad. Otherwise, the cooling effect will be affected.
Thermal pad size and thickness description:
The thermal conductivity is the same for each thickness. Thermal pads can be purchased in various thicknesses and sizes. Users can also cut them to desired size.

FAQ:
How to choose the size you need.
1: Calculate the size of each location that needs to be cooled.
2: Calculate the thickness of the thermal pad according to the blank between the boards.
3: The thermal pad is soft. The thickness needs to be increased by 0.5-1.0mm in the calculation. Fits tightly after installation squeeze. Better heat dissipation.
4: When the thickness of the purchased thermal pad is insufficient, it can also be used in superposition.
5: The heat dissipation effect is best only when the two sides of the thermal pad are closely fitted and not crushed.

Note:
Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
Please allow 1-2cm measuring deviation due to manual measurement.

Included:
1*Heat Dissipation Silicone Pad