Fluke 50 Series Ii Termómetro Digital, 3 Pilas Aa, -418 A 3

Descripción

Termopar termómetro para uso en aplicaciones que requieren una amplia gama de temperaturas, incluyendo hornos, hornos, congeladores, y otras aplicaciones industriales; Mide la temperatura en grados Celsius, Fahrenheit, o Kelvin, a través de un tipo K, Tipo de tipo J, Tipo T, E, N, Tipo R, o tipo S Tipo de sonda termopar; Incluye un orificio de tipo K Sonda termopar con un cable 40 que las medidas de -40 a 260 grados C (-40 a 500 grados F); Almacena hasta 500 puntos de datos para el análisis y seguimiento; Se ajusta a las normas de bits para el cumplimiento con normas The Fluke 50 Series II digital thermocouple thermometer is used for applications requiring a broad range of temperatures, including furnaces, kilns, freezers, and other industrial applications. This thermometer measures temperatures in Celsius, Fahrenheit, or Kelvin via a Type K, Type J, Type T, Type E, Type N, Type R, or Type S thermocouple probe. It comes with one or two Type K bead thermocouple probes with 40 cables that measure from -40 to 260 degrees C (-40 to 500 degrees F). It can store up to 500 points of data for analysis and monitoring, and it has an infrared communication port for exporting data to a computer for analysis. This thermometer provides the relative time of minimum, maximum, and average temperature measurements for monitoring. It has an offset function that allows the operator to compensate for thermocouple errors and increase accuracy. The thermometer body protects against splashing water and dust, and it comes in a holster that absorbs impact to help protect against damage if dropped. The thermometer enters sleep mode after 20 minutes of inactivity to help preserve battery life. It conforms to National Institute of Standards and Technology (NIST) standards for compliance with regulations. The European Conformity (CE) marking indicates compliance with applicable European Union (EU) directives, and CSA mark indicates compliance with applicable Canadian Standards Association directives. This thermometer is suitable for measuring the temperature of equipment, systems, and processes in industrial and manufacturing environments.
Specifications
Type K temperature range -200 to 1372 degrees C (-328 to 2501 degrees F) Type J temperature range -210 to 1200 degrees C (-346 to 2192 degrees F) Type T temperature range -250 to 400 degrees C (-418 to 752 degrees F) Type E temperature range -150 to 1000 degrees C (-238 to 1832 degrees F) Type N temperature range -200 to 1300 degrees C (-328 to 2372 degrees F) Type R and Type S temperature range 0 to 1767 degrees C (32 to 3212 degrees F) Temperature accuracy above -100 degrees C Type K, J, T, E, and N: or - 0.05% 0.3 degrees C; Type R and S: or - 0.05% 0.4 degrees C Temperature accuracy below -100 degrees C Type K, J, E, and N: or - 0.20% 0.3 degrees C; Type T: or - 0.50% 0.3 degrees C Display resolution 0.1 degrees C / degrees F / K 1000 degrees; 1.0 degrees C / degrees F / K or 1000 degrees Applicable standards NIST-175 Power Supply (3) AA Batteries Weight 400g Dimensions 173 x 86 x 38mm (H x W x D)

H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.
Digital thermocouple thermometers measure the temperature of air, liquids, or surfaces. They may measure temperature in Celsius, Fahrenheit, or both. Thermocouple thermometers are composed of two conductors of different metals, usually alloys of the same metal, which touch at the sensor end of the thermometer. The difference in conductivity between the two metal pieces produces a voltage flow between the sensor end and the open end of each conductor, which can be used to determine the temperature. Different alloys are used for different temperature ranges. Thermocouple thermometers are used in applications that require a large temperature range and do not require a high degree of accuracy. These thermometers are used in kilns, turbine exhaust systems, and furnaces.
Fluke Corporation manufactures electrical testing tools and software for industrial and commercial applications. The company, founded in 1948, is headquartered in Everett, WA.
Whats in the Box
Fluke 50 Series II digital thermocouple thermometer
(1) or (2) 80 PK-1 Type K thermocouples Todos nuestros productos estan en inglés SKU 17082214057

CHUPAPRECIOS

Somos una empresa original, fresca y alegre. Comprometidos en brindarles a nuestro clientes la opción de explorar y descubrir productos exclusivos, con una gran variedad de opciones, que al sonido de un solo click, puedan conseguir cualquier producto vía on-line y enviarlo en cualquier rincón de México.


RAZONES PARA COMPRAR CON NOSOTROS

* Compra con confianza somos mercadolíder.

* Todos nuestros productos son nuevos y originales.

* Todos nuestros productos cuentan con 1 mes de garantía.


MÉTODO DE COMPRA

1) Da click en comprar una vez que hayas resuelto todas tus dudas con nosotros.

2) Elige la forma de entrega.

3) Puedes pagar con Mercadopago de forma 100% segura.

4) Tu paquete llega en un estimado de 4 a 8 días hábiles.



PORQUÉ ELEGIRNOS?

* MARCAS ORIGINALES (NO IMITACIONES)

* SEGURIDAD: 100% COMPRA PROTEGIDA

* DEVOLUCIÓN: SIN COSTOS ADICIONALES

* CONFIANZA: SEGURIDAD EN TU PAGO

Garantía del vendedor: 30 días