Fuente De Poder Laser 100w Es150 Iso 9001 Reci
en 18 meses sin intereses de
IVA incluido
Stock disponible
MercadoLíder | +5mil ventas
- Tienes 30 días desde que lo recibes.
Compra ProtegidaSe abrirá en una nueva ventana, recibe el producto que esperabas o te devolvemos tu dinero.
MercadoLíder Platinum
+5mil
Ventas concretadas
Brinda buena atención
Medios de pago
Hasta 12 meses sin tarjeta
Tarjetas de crédito
Tarjetas de débito
Efectivo
Características del producto
Características principales
Marca | RECI |
|---|---|
Modelo | Es150 |
Potencia | 80 W |
Otras características
Voltaje mínimo de entrada - Voltaje máximo de entrada | 110V - 220V |
|---|---|
Voltaje mínimo de salida - Voltaje máximo de salida | 110V - 220V |
Con protección contra cortocircuito | Sí |
Descripción
Fuente de poder de alta calidad y con certificacion ISO 9001! RECI y EFR.
I. Es150 power supply Main features:
1.Initiative PFC function, AC90-250V wide input voltage range, universal for all countries voltage.
2.Special design for outer shell, more beautiful appearance, better heat dissipation.
3.Improved current control mode, more stable laser, better compatibility, more adaptable for different kinds of laser tubes.
4.Simple power control, user can control laser with high or low level signal.
5.With test button, easy to test laser tube and Es150 power supply.
4.Small size outer shell, suitable for installing on the beam of cutting bed.
II. Es150 laser power supply Advantages:
1. Easy Control: The start and stop of laser can be easily controlled by TTL level. Both 0-5V analog signal and 5V PWM signal can control the laser power.
2. Es150 Laser Power Supply has output open circuit protection.
3. Es150 power supply has TTL signal indication, water through signal indication and laser output
indication.
III. Es150 power supply Application:
Es150 Laser Power Supply is used for 130w,150w,180w laser cutter and engraver for Cutting and Engraving non metal materials as Acrylic, Fabric, Double Color Sheet and Rubber,ect.
IV. Es150 power supply Specifications:
V.Es150 power supply Operation Instruction:
1.Laser Tube connection: Es150 laser power supply high voltage terminal (HV+) should be connected to the positive pole of CO2 laser tube. Current circuit of Es150 laser power supply shall be connected to negative pole (laser output terminal) of laser tube by an ampere meter or directly.
2.Connection of control signal
The laser machine control signal connect to Es150 laser power supply control terminal ,after connecting the DAC output signal and TTL signal of external computer with Es150 power supply, the laser tube shall work as expected. If the laser lamp can not work properly, check the control signal is correct or not(include check the voltage specification and logic),if use PWM control as power control,make sure f=20KHz,Amplitude (peak value) =5V,Check and make sure protection switch WP connection is correctat same time.
Garantía del vendedor: 3 meses