Dnc - Titan Rs232 To Usb Cnc Dnc Transfer System

Descripción

* Precio neto
* se factura
* envio gratis

This is a Portable Program Transfer Device that transfers CNC machine programs from a standard USB flash drive (Thumb Drive, Pen Drive, memory stick…) to or from the CNC control through the RS232 communications port, also referred to as Drip feed DNC or Up-Loading & Down-Loading. Extension of file name supports: *.?NC, *.TXT,*.NC, *tap

Design characteristics & Features

· LCD 2.4 inch, 65536 colors : display program content, File & Folder list, vibrant and visualization

· Internal MEMORY 2Gb/4Gb/8Gb use to storage and manage NC programs

· 02 ports of USB 2.0

· Protocol: RS232 & Parallel 50-pin for old Fanuc paper tape communication.

· Power switch: ON/OFF

· 04 magnet nuts to mounting on CNC machine

· 06 Buttons: RESET, FUNCTION, BACK, SET, UP, DOWN

· Function: COPY-PASTE, CUT-PASTE, RENAME, DELETE, Make NEW FOLDER: easy management files & folders on USB flash drive and internal MEMORY.

· Function AUTO CUTTING: it can cutting by Percent or Line Number. We can see program content after cutting.

· Function SEND – Send program to CNC machine, monitoring program content when sending

· Function FORCED SEND – Forced transfer a program to CNC machines without the required signal from CNC machines (Skip XON)

· Function RECEIVE – Receive program / parameter from CNC machine.

· USB/MEMORY capacity monitoring; Format USB flash drive, etc.



Applications:

Compatible with CNC machines currently uses operating systems such as: most of control of FANUC (FANUC 6M, FANUC 6T, FANUC 18, FANUC O, ect) , Mitsubishi, Yasnac, Okuma, Mazak,Haas, ect
Replace computer running DNC software.